Types of 3D Printers Applied in Industrial Pharmacy and Drug Delivery
DOI:
https://doi.org/10.47577/biochemmed.v3i2.6064Keywords:
3D printers, Pharmacy, Drug delivery, manufacture.Abstract
The promising technology depend on using 3D printers' machines (3DPs) might be considered a modern approach in drug industry and delivery. A 3D printer may define as a machine which fabricates 3D models or products using computer aided design (CAD) software programs. These printers can create a single copy of an item that is too complicated and very difficult to produce by using traditional manufacturing methods. Moreover, it has ability to make products with complex internal structure geometries with lower cost and time. Recently, 3D printers have been involved into printing bio-products, custom pills and organs for transplant. This review presents the types of 3DPs suitable for drug industry and delivery. There are several types of 3DPs are used in pharmaceutical fields including inkjet (IK) printers, fused filament (FF) type printers, extrusion and hot melt extrusion 3D printing, sintering by selective kind of laser (SLS), Stereolithography (SLA), melting by micro selective laser (SLM), binder applied jetting printing (BJ) and the laminated object engineering manufacturing (LOM).
References
-Mohammed A. A.. Evaluation comparative of Anti- clogging drip Emitters design. International Journal of Industrial Electronics and Electrical Engineering.2016;4(9):66-69.
- Park, B. J., Choi, H. J., Moon, S. J., Kim, S. J., Bajracharya, R., Min, J. Y., & Han, H.-K. (October 29). Pharmaceutical applications of 3D printing technology: current understanding and future perspectives. Journal of Pharmaceutical Investigation, 2018; 49 ( 6): 575-585.
-Wang Z., Liu L., Xiang S., Jiang C., Wu W., Ruan S."Formulation and Characterization of a 3D-Printed Cryptotanshinone-Loaded Niosomal Hydrogel for Topical Therapy of Acne". AAPS PharmSciTech journal2020. 21 (5).
- Alsaadi M, JL Italia, AB Mullen, Ravi Kumar MN, AA Candlish, RA Williams, CD Shaw, et al. 2012. "The efficacy of aerosol treatment with non-ionic surfactant vesicles containing amphotericin B in rodent models of leishmaniasis and pulmonary aspergillosis infection". Journal of Controlled Release: Official Journal of the Controlled Release Society2012; 160 (3): 685-691.
- Al_Gawhari F.J. Formulation of DiclofenaSodium Niosomes as Oral Drug Delivery System. American Journal of PharmTech Research 2015;3(5):234-241
-Goyanes A, Buanz AB, Hatton GB, Gaisford S, Basit AW 3D printing of modifed-release aminosalicylate (4-ASA and 5-ASA) tablets. Eur J Pharm Biopharm2015a; 8(9):157-162.
- Azad M.A., Olawuni D., Kimbell G., Badruddoza A.Z, Md. Hossain S., & Sultana T..Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective. Pharmaceutics2020; 12( 2); 124-129.
- A.A.M. Ali& M. Aboud, Innovative Engineering Design for Reliability for the moldboard plows, Euphrates Journal of Agriculture Science- Third Agricultural Conference2016;70-74 ,
-Alhijjaj, M., Nasereddin, J., Qi, S., Alhijjaj, M., & Belton, P. (December 01,). Impact of processing parameters on the quality of pharmaceutical solid dosage forms produced by fused deposition modeling (FDM). Pharmaceutics journal 2019; 11, 12.
- Aho, J., Botker, J. P., Genina, N., Edinger, M., Arnfast, L., & Rantanen, J. Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling. Journal of Pharmaceutical Sciences2019; 10(8 ): 26-35.
- Mathew, E., Pitzanti, G., Larraneta, E., Lamprou, D. A., & Pitzanti, G. Three-dimensional printing of pharmaceuticals and drug delivery devices. Pharmaceutics Journal 2020, 12, 3.
-long, A 3D Printed Ballistic Drug Delivery System for Wildlife Administration, Auckland University of Technology.2019.18-20
- Chai, X., Chai, H., Wang, X., Yang, J., Li, J., Zhao, Y., Cai, W., ... Xiang, X. Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone. Scientific Reports2017, 7, 1.
- Khaled SA, Burley JC, Alexander MR, Yang J, Roberts CJ .3D printing of tablets containing multiple drugs with defned release profles. Int J Pharm 2015;4(4):643-650.
- Abd, al-Rahman I. R, Iqbal H. al-Khatib, Fatimah J. Jawad, and al-Rasul A. A. Abd. "Preparation of Anise and Thyme Lotion for Topical Use." Iraqi Journal of Pharmaceutical Sciences. 16.1 (2007): 8-13.
- Fatima J. Jawad, and al-Rasul A. A. AbdFatima A. Tawfiq. A combined formulation of diloxanide furoate & metronidazole benzoate in suspension dosage form. Iraqi journal of pharmacy2001; 1 (1);145-149.
- Kuebler, S.m., S. Ananthavel, M. Rumi, S.r. Marder, J.w. Perry, S. Barlow, B.h. Cumpston, D.l. Dyer, J.e. Ehrlich, L.l. Erskine, A.a. Heikal, I.-Y. Sandy Lee, D. Mccord-Maughon, J. Qin, H. Rockel, and X.-L. Wu. Two-photon Polymerization Initiators for Efficient Three-dimensional Optical Data Storage and Microfabrication. In: Technical Digest. Summaries of Papers Presented at the Quantum Electronics and Laser Science Conference; 1999.
- Zhang, X., X.n Jiang, and C. Sun. Micro-stereolithography of Polymeric and Ceramic Microstructures. In: Sensors and Actuators A: Physical journal 1997;7(2):p.149-56.
- Choi, Jae-Won, Ryan B. Wicker, Seok-Hyun Cho, Chang-Sik Ha, and Seok-Hee Lee. Cure Depth Control for Complex 3D Microstructure Fabrication in Dynamic Mask Projection Micro-stereolithography. In: Rapid Prototyping Journal 2009; 15 (1): p.59-70.
- V. R. Kulkarni, A. Lu, and M. Maniruzzaman, 3D Printing in Personalized Drug Delivery, AmericanPharmaceuticalReviewJournal2021; https://www.americanpharmaceuticalreview.com/Featured-Articles/573677-3D-Printing-in-Personalized-Drug-Delivery.
-A. V. Healy , E. Fuenmayor, P. Doran, L.M. Geever C. L. Higginbotham and J. G. Lyons. Additive Manufacturing of Personalized Pharmaceutical Dosage Forms via Stereolithography. Pharmaceutics Journal MDPI 2019, 11, 645; doi:10.3390/pharmaceutics11120645.
- Vehse, M., Petersen, S., Sternberg, K., Schmitz, K., & Seitz, H. Drug Delivery From Poly(ethylene glycol) Diacrylate Scaffolds Produced by DLC Based Micro-Stereolithography. Macromolecular Symposia 2014;346, 43-47.
- Ali, Z., Tureyen, E. B., Karpat, Y., & Cakmakci, M. (January 01, 2016). Fabrication of Polymer Micro Needles for Transdermal Drug Delivery System Using DLP Based Projection Stereo-lithography. Procedia Cirp journal 2016;, 42, 87-90.
-Vaut, L., Jensen, K. E., Boisen, A., Khosla, A., Tosello, G., & Furukawa, H.Additive manufacturing of microreservoir devices for oral drug delivery using an acculas BA-30 micro-stereolithography instrument: A feasibility study. Journal of the Electrochemical Society2019 166, 9.
- Nazarov A.., I. Skornyakov, and I. Shishkovsky, The Setup Design for Selective Laser Sintering of High-Temperature Polymer Materials with the Alignment Control System of Layer Deposition, Machines, Key Engineering Materials 2018; 6( 11): PP:1-17.
- Salmoria GV, Vieira FE, Ghizoni GB, Marques MS, and Kanis LA. "3D printing of PCL/Fluorouracil tablets by selective laser sintering: Properties of implantable drug delivery for cartilage cancer treatment". Rheumatology and Orthopedic Medicine 2017. 2 (3).
- Mu Q.,. Wang L., Dunn C. K., Kuang X, Duan F., Z. Zhang, Qi H.I., T. Wang, Digital light processing 3D printing of conductive complex structures, Additive Manufacturing journal 2017;18(1).pp:74-83.
- Tyge E., Pallisgaard J., Lillethorup M., Hjaltalin N., Thompson M., and Clemmensen L.H. Characterizing Digital Light Processing (DLP) 3D Printed Primitives, Springer International Publishing Switzerland 2015 R.R. Paulsen and K.S. Pedersen (Eds.): SCIA 2015, LNCS 9127, pp. 302-313,
- Katal G., Tyagi N., Joshi A., Digital Light Processing and its Future Applications, International Journal of Scientific and Research Publications2013; 3 (4), pp:1-8.
- Zhang J., Hu Q., Wang S., Tao J., Gou M., Digital Light Processing Based Three-dimensional Printing for Medical Applications. International Journal of Bioprinting 2020 . 6(1). PP:242-251.
- Kadry H, Wadnap S, Xu C, Ahsan F. Digital light processing (DLP) 3D-printing technology and photoreactive polymers in fabrication of modified-release tablets. Eur J Pharm Sci. 2019 1;135:60-67. doi: 10.1016/j.ejps.2019.05.008. Epub 2019 May 17. PMID: 31108205.
- Nagarajan B., Hu Z., Song X., Zha w Wei J. Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives. EngineeringJournal2019;5(4).PP:701-720
-Hassanin, H., Finet, L., Cox, S. C., Jamshidi, P., Grover, L. M., Shepherd, D. E. T., Addison, Attallah, M. M. Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels. Additive ManufacturingJournal2018, 20, 144-155.
- Gokuldoss P.K., Kolla S. and EckertJ. , Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting--Selection Guidelines, Materials journal 2017, 10, 672; doi:10.3390/ma10060672.
- Andrey K., B. Mikael B., B. VEGA B. Alberto C., P. Vladimir, and C. Ekaterina, 3Developing New Materials for Electron Beam Melting: Experiences and Challenges, Materials Science Forum: 2018; ( 9)41. pp: 190-195.
- Koike M. , Greer P., Owen K. Lilly G. , Murr L. E.. Gaytan S. M. , MartinezE. and T. Okabe T. , Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping2011.4(10).PP: 1776-1792.
- Tenny S. Varacallo M. Evidence Based Medicine (EBM).2018. NCBI Bookshelf. A service of the National Library of Medicine, National Institutes of Health.
- Puebla K. Murr L.E. Gaytan S.M., Martinez E., Medina F., Wicker R. B., Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V, Materials Sciences and Applications Journal, 2012, 3, 259-264.
- Mahale, T.R. Electron Beam Melting of Advanced Materials and Structures, PhD Thesis, 2009; Faculty of North Carolina State University.
- Lv X., Ye F., Cheng L., Fan S., Liu Y., Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment, Ceramics Internatio jalurnal2019; 45 12609-1262.
-Alhnan MA, Okwuosa TC, Sadia M, Wan K-W, Ahmed W,Arafat B. Emergence of 3D printed dosage forms: opportunities and challenges. Pharm Res. 2016;33(8).PP:1817-32.
-Balakrishna.G1, Praveen Kumar B.C2, Hubert Johnson Rodrigues3, Lakshmikishor ds4, Mohammed Hubaish, Design and Fabrication of Powder Based Binder Jetting 3d Printer, International Journal of Recent Trends in Engineering & Research2017; 3 (9).PP:142-151.
- L. SrinivasL. , M. Jaswitha M., V. Manikanta V, B. Bhavya B., B. Deva Himavant B., 3D printing in pharmaceutical technology: a review Int, Res.pharm(2019) (2)10.PP.8-17
- Chang, S.-Y., Li, S. W., Kowsari, K., Shetty, A., Sorrells, L., Sen, K., Nagapudi, K., Ma, A. W. K. Binder-Jet 3D Printing of Indomethacin-laden Pharmaceutical Dosage Forms2020. 109(10), PP 3054-3063
- Shahrubudina N., Leea T.C., Ramlan R. , An Overview on 3D Printing Technology: Technological, Materials and Application, Procedia Manufacturing Journal 2019; Vol.35. P.P:1286-1296.
- Msallem B. , Sharma N., Cao S., Halbeisen F.S., Zeilhofer H. and Thieringer F. M., Evaluation of the Dimensional Accuracy of3D-Printed Anatomical Mandibular Models Using FFF, SLA, SLS, MJ, and BJ Printing Technology. J. Clin. Med. 2020, 9(3), 817; doi:10.3390/jcm9030817.
-Sonmez F.O. and Hahn H.T. Thermome chanical analysis of the laminated object manufacturing (LOM) process. Rapid Prototyping Journal.1998.4(1).PP:26-36.
- Razavykia A. Eugenio Brusa E. Delprete C. and Yavari R. An Overview of Additive Manufacturing Technologies--A Review to Technical Synthesis in Numerical Study of Selective Laser Melting. Materials Journal2020, 13, 3895; doi:10.3390/ma13173895.
- Byeong Ju Park B.J. * Choi H.J. * Moon S.J. * Kim S.J. Bajracharya R. Min J.Y Han H.K. Pharmaceutical applications of 3D printing technology: current understanding and future perspectives. Journal of Pharmaceutical Investigation 2019; 49:575-585.
-Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. Novel drug delivery devices for providing linear release profiles fabricated by 3DP. International Journal of Pharmaceutics2009; 370. 1.PP:160-167.
