Analysis an optical communications system by using Optisystem program to transfer data over various distances

Authors

Dr. Hasan J. Hasan Department of Science, College of Basic Education, University of Sumer, 64005, Rifaee, IRAQ

DOI:

https://doi.org/10.47577/technium.v15i.9738

Abstract

The transmission of data over long distances is a big challenge in the telecommunications industry. One way to achieve this is to use different wavelengths of light.In this article a comparison of wavelengths has been made to analysis of long-distance data transmission using three different wavelengths: 1625 nm, 1550 nm, and 810 nm. The purpose is to determine the most appropriate wavelength for transmitting data over distances from 60 km to 140 km, with increments of 20 km for each test. The rating is based on the performance of each wavelength in terms of signal quality, data integrity, and overall transmission efficiency.

To attain this, a comprehensive trial setup is employed. The investigational framework involves transferring data signals at every wavelengths over an optical fiber, and simulating altered transmission distances in the definite range. Key factors such as signal strength, Q. factor and bit error rate (BER) are wisely observed and analyzed. The obtained results show distinct features for each wavelengths with esteem to long-distance data transmission over the experimental usage in the simulation application for these wavelengths then examining the above factors.

References

Uysal, M. and H. Nouri. Optical wireless communications—An emerging technology. in 2014 16th international conference on transparent optical networks (ICTON). 2014. IEEE.

Ali, A.H., H.J. Alhamdane, and B.S. Hassen, Design analysis and performance evaluation of the WDM integration with CO-OFDM system for radio over fiber system. Indonesian Journal of Electrical Engineering and Computer Science, 2019. 15(2): p. 870-878.

Awalia, W. and A. Pantjawati. Performance simulation of fiber to the home (FTTH) devices based on optisystem. in IOP Conference Series: Materials Science and Engineering. 2018. IOP Publishing.

Othman, M., et al., An analysis of 10 Gbits/s optical transmission system using fiber Bragg grating (FBG). IOSR Journal of Engineering (IOSRJEN) ISSN, 2012: p. 2250-3021.

Rahman, S., et al., Mitigation of nonlinear distortions for a 100 Gb/s radio-over-fiber-based WDM network. Electronics, 2020. 9(11): p. 1796.

Sobolewski, J.S., Fiber optics, in Encyclopedia of Computer Science. 2003. p. 702-704.

Chacon, P.J., et al., A wearable pulse oximeter with wireless communication and motion artifact tailoring for continuous use. IEEE Transactions on Biomedical Engineering, 2018. 66(6): p. 1505-1513.

Omer, E., Performance of optical fiber communication system. 2022.

Haffner, C., et al., All-plasmonic Mach–Zehnder modulator enabling optical high-speed communication at the microscale. Nature Photonics, 2015. 9(8): p. 525-528.

Johnson, D.H., Signal-to-noise ratio. Scholarpedia, 2006. 1(12): p. 2088.

Ali, I., Bit-error-rate (BER) simulation using MATLAB. International Journal of Engineering Research and Applications, 2013. 3(1): p. 706-711.

Wagener, J.L., et al. Fiber grating optical spectrum analyzer tap. in Integrated Optics and Optical Fibre Communications, 11th International Conference on, and 23rd European Conference on Optical Communications (Conf. Publ. No.: 448). 1997. IET.

Downloads

Published

2023-10-28

How to Cite

Hasan, H. J. (2023). Analysis an optical communications system by using Optisystem program to transfer data over various distances. Technium: Romanian Journal of Applied Sciences and Technology, 15, 75–86. https://doi.org/10.47577/technium.v15i.9738